Network UPS Tools - Back-UPS CS 500

Click here to see reports of other supported models from APC.

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.6.0

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

This device is known to support the following variables (values are just examples):

battery.charge	`100`
battery.charge.low	`10`
battery.charge.warning	`50`
battery.date	`2010/09/19`
battery.mfr.date	`2010/09/19`
battery.runtime	`3877`
battery.runtime.low	`120`
battery.temperature	`29.2`
battery.type	`PbAc`
battery.voltage	`13.6`
battery.voltage.nominal	`12.0`
device.mfr	`American Power Conversion`
device.model	`Back-UPS CS 500`
device.serial	`4B1038P51197`
device.type	`ups`
driver.name	`usbhid-ups`
driver.parameter.pollfreq	`30`
driver.parameter.pollinterval	`2`
driver.parameter.port	`auto`
driver.version	`2.6.0`
driver.version.data	`APC HID 0.95`
driver.version.internal	`0.35`
input.sensitivity	`medium`
input.voltage	`224.0`
input.voltage.nominal	`230`
output.voltage	`230.0`
output.voltage.nominal	`230.0`
ups.beeper.status	`enabled`
ups.delay.shutdown	`20`
ups.delay.start	`30`
ups.firmware	`808.q10 .I`
ups.firmware.aux	`q10`
ups.load	`0.0`
ups.mfr	`American Power Conversion`
ups.mfr.date	`2010/09/19`
ups.model	`Back-UPS CS 500`
ups.productid	`0002`
ups.serial	`4B1038P51197`
ups.status	`OL`
ups.test.result	`No test initiated`
ups.timer.reboot	`0`
ups.timer.shutdown	`-1`
ups.timer.start	`0`
ups.vendorid	`051d`

This device is known to support the following NUT’s instant commands: