Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from APC.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.0.3

Report #1

This device is known to work with driver newhidups, now replaced by the usbhid-ups one.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100

battery.charge.low

10

battery.charge.warning

50

battery.date

not set

battery.mfr.date

2005/04/02

battery.runtime

2850

battery.runtime.low

120

battery.voltage

13.0

battery.voltage.nominal

12.0

driver.name

newhidups

driver.parameter.port

auto

driver.version

2.0.3

driver.version.data

APC HID 0.8

driver.version.internal

0.28

input.transfer.high

139

input.transfer.low

88

input.voltage

110.0

input.voltage.nominal

120

ups.beeper.status

disabled

ups.delay.shutdown

-1

ups.firmware

818.w1.D

ups.firmware.aux

w1

ups.load

20

ups.mfr

APC

ups.mfr.date

2005/04/02

ups.model

Back-UPS ES 650

ups.serial

QB0514132764

ups.status

OL