Network UPS Tools - Back-UPS RS 1500

Click here to see reports of other supported models from APC.

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.2.1

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

This device is known to support the following variables (values are just examples):

battery.charge	`100`
battery.charge.low	`10`
battery.charge.warning	`50`
battery.date	`2001/09/25`
battery.mfr.date	`2004/09/04`
battery.runtime	`1740`
battery.runtime.low	`600`
battery.type	`PbAc`
battery.voltage	`26.6`
battery.voltage.nominal	`24.0`
driver.name	`usbhid-ups`
driver.parameter.pollfreq	`30`
driver.parameter.pollinterval	`2`
driver.parameter.port	`auto`
driver.parameter.productid	`0002`
driver.parameter.serial	`JB0436038663`
driver.parameter.vendorid	`051d`
driver.version	`2.2.1`
driver.version.data	`APC HID 0.92`
driver.version.internal	`0.32`
input.transfer.high	`264`
input.transfer.low	`194`
input.voltage	`230.0`
input.voltage.nominal	`230`
ups.beeper.status	`enabled`
ups.delay.shutdown	`-1`
ups.firmware	`8.g8 .I`
ups.firmware.aux	`g8`
ups.load	`70`
ups.mfr	`American Power Conversion`
ups.mfr.date	`2004/09/04`
ups.model	`Back-UPS RS 1500`
ups.productid	`0002`
ups.serial	`JB0436038663`
ups.status	`OL`
ups.test.result	`No test initiated`
ups.vendorid	`051d`

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

This device is known to support the following variables (values are just examples):

battery.charge	`100`
battery.charge.low	`10`
battery.charge.warning	`50`
battery.date	`2001/09/25`
battery.mfr.date	`2004/09/04`
battery.runtime	`64800`
battery.runtime.low	`120`
battery.type	`PbAc`
battery.voltage	`26.6`
battery.voltage.nominal	`24.0`
driver.name	`usbhid-ups`
driver.parameter.pollfreq	`30`
driver.parameter.pollinterval	`2`
driver.parameter.port	`auto`
driver.parameter.productid	`0002`
driver.parameter.serial	`JB0436038664`
driver.parameter.vendorid	`051d`
driver.version	`2.2.1`
driver.version.data	`APC HID 0.92`
driver.version.internal	`0.32`
input.transfer.high	`264`
input.transfer.low	`194`
input.voltage	`230.0`
input.voltage.nominal	`230`
ups.beeper.status	`enabled`
ups.delay.shutdown	`-1`
ups.firmware	`8.g8 .I`
ups.firmware.aux	`g8`
ups.load	`0`
ups.mfr	`American Power Conversion`
ups.mfr.date	`2004/09/04`
ups.model	`Back-UPS RS 1500`
ups.productid	`0002`
ups.serial	`JB0436038664`
ups.status	`OL`
ups.test.result	`No test initiated`
ups.vendorid	`051d`

This device is known to work with driver newhidups, now replaced by the usbhid-ups one.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

This device is known to support the following variables (values are just examples):

This device is known to work with driver newhidups, now replaced by the usbhid-ups one.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

This device is known to support the following variables (values are just examples):