Network UPS Tools - Back-UPS XS 1200

Click here to see reports of other supported models from APC.

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.2.0

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

This device is known to support the following variables (values are just examples):

battery.charge	`1`
battery.charge.low	`1`
battery.charge.warning	`1`
battery.date	`2001/00/00`
battery.mfr.date	`1980/00/01`
battery.runtime	`1`
battery.runtime.low	`1`
battery.temperature	`-272`
battery.type	`Back-UPS XS 1200 FW`
battery.voltage	`1.0`
battery.voltage.nominal	`1.0`
driver.name	`usbhid-ups`
driver.parameter.pollinterval	`2`
driver.parameter.port	`auto`
driver.version	`2.2.0-`
driver.version.data	`APC/CyberPower HID 0.9`
driver.version.internal	`0.30`
input.transfer.high	`1`
input.transfer.low	`1`
input.voltage	`1.0`
input.voltage.nominal	`1`
output.voltage	`1.0`
output.voltage.nominal	`1.0`
ups.beeper.status	`disabled`
ups.delay.restart	`1`
ups.delay.shutdown	`1`
ups.firmware	`8.g1 .D`
ups.firmware.aux	`g1`
ups.load	`1.0`
ups.mfr	`American Power Conversion`
ups.mfr.date	`1980/00/01`
ups.model	`Back-UPS XS 1200`
ups.power.nominal	`1`
ups.productid	`0002`
ups.serial	`JB0612018831`
ups.status	`OL LB OVER RB BOOST`
ups.test.result	`Done and passed`
ups.vendorid	`051d`

This device is known to work with driver newhidups, now replaced by the usbhid-ups one.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

This device is known to support the following variables (values are just examples):