Network UPS Tools - Smart-UPS 1500

Click here to see reports of other supported models from APC.

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.7.2

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

This device is known to support the following variables (values are just examples):

battery.charge	`93`
battery.charge.low	`10`
battery.charge.warning	`50`
battery.mfr.date	`2006/04/01`
battery.runtime	`2220`
battery.runtime.low	`120`
battery.temperature	`30.6`
battery.type	`PbAc`
battery.voltage	`27.4`
battery.voltage.nominal	`24.0`
device.mfr	`American Power Conversion`
device.model	`Smart-UPS 1500`
device.serial	`AS0614322014`
device.type	`ups`
driver.name	`usbhid-ups`
driver.parameter.pollfreq	`30`
driver.parameter.pollinterval	`2`
driver.parameter.port	`auto`
driver.version	`2.7.2`
driver.version.data	`APC HID 0.95`
driver.version.internal	`0.38`
input.sensitivity	`high`
input.transfer.high	`127`
input.transfer.low	`106`
input.transfer.reason	`input voltage out of range`
input.voltage	`121.6`
output.frequency	`60.0`
output.voltage	`121.6`
output.voltage.nominal	`120.0`
ups.beeper.status	`enabled`
ups.delay.shutdown	`20`
ups.delay.start	`30`
ups.firmware	`601.3.D`
ups.firmware.aux	`1.5`
ups.load	`32.5`
ups.mfr	`American Power Conversion`
ups.mfr.date	`2006/04/01`
ups.model	`Smart-UPS 1500`
ups.productid	`0002`
ups.serial	`AS0614322014`
ups.status	`OL`
ups.test.result	`No test initiated`
ups.timer.reboot	`-1`
ups.timer.shutdown	`-1`
ups.timer.start	`-1`
ups.vendorid	`051d`

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

This device is known to support the following variables (values are just examples):

battery.charge	`100`
battery.charge.low	`10`
battery.charge.warning	`50`
battery.mfr.date	`2008/05/22`
battery.runtime	`3420`
battery.runtime.low	`120`
battery.temperature	`24.7`
battery.type	`PbAc`
battery.voltage	`27.7`
battery.voltage.nominal	`24.0`
device.mfr	`American Power Conversion`
device.model	`Smart-UPS 1500`
device.serial	`AS0821131402`
device.type	`ups`
driver.name	`usbhid-ups`
driver.parameter.pollfreq	`30`
driver.parameter.pollinterval	`2`
driver.parameter.port	`auto`
driver.version	`2.6.4`
driver.version.data	`APC HID 0.95`
driver.version.internal	`0.37`
input.sensitivity	`high`
input.transfer.high	`253`
input.transfer.low	`208`
input.voltage	`231.8`
output.current	`1.05`
output.frequency	`50.0`
output.voltage	`231.8`
output.voltage.nominal	`230.0`
ups.beeper.status	`enabled`
ups.delay.shutdown	`20`
ups.delay.start	`30`
ups.firmware	`653.18.I`
ups.firmware.aux	`7.3`
ups.load	`22.7`
ups.mfr	`American Power Conversion`
ups.mfr.date	`2008/05/22`
ups.model	`Smart-UPS 1500`
ups.productid	`0002`
ups.serial	`AS0821131402`
ups.status	`OL`
ups.test.result	`No test initiated`
ups.timer.reboot	`-1`
ups.timer.shutdown	`-1`
ups.timer.start	`-1`
ups.vendorid	`051d`

This device is known to support the following NUT’s instant commands:

This device is known to work with driver apcsmart.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

This device is known to support the following variables (values are just examples):

battery.alarm.threshold	`0`
battery.charge	`100.0`
battery.charge.restart	`00`
battery.date	`09/06/05`
battery.packs	`000`
battery.runtime	`3720`
battery.runtime.low	`120`
battery.voltage	`27.40`
battery.voltage.nominal	`024`
driver.name	`apcsmart`
driver.parameter.pollinterval	`2`
driver.parameter.port	`/dev/ttyS0`
driver.parameter.sdtype	`0`
driver.version	`2.2.1-`
driver.version.internal	`1.99.8`
input.frequency	`50.00`
input.quality	`FF`
input.sensitivity	`H`
input.transfer.high	`253`
input.transfer.low	`208`
input.transfer.reason	`S`
input.voltage	`236.1`
input.voltage.maximum	`236.1`
input.voltage.minimum	`233.2`
output.voltage	`236.1`
output.voltage.nominal	`230`
ups.delay.shutdown	`090`
ups.delay.start	`000`
ups.firmware	`601.3.I`
ups.id	`UPS_IDEN`
ups.load	`004.5`
ups.mfr	`APC`
ups.mfr.date	`09/06/05`
ups.model	`Smart-UPS 1500`
ups.serial	`AS0537230534(`
ups.status	`OL`
ups.temperature	`031.0`
ups.test.interval	`1209600`
ups.test.result	`NO`

The commands to shutdown the UPS don’t seem to work: shutdown.stayoff, shutdown.return and load.off all seem to silently do nothing.