Network UPS Tools - Smart-UPS 1500 XLM

Click here to see reports of other supported models from APC.

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.4.1

Report #1

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge	`100`
battery.charge.low	`10`
battery.charge.warning	`50`
battery.mfr.date	`2003/07/01`
battery.runtime	`1920`
battery.runtime.low	`120`
battery.temperature	`25.2`
battery.type	`PbAc`
battery.voltage	`27.7`
battery.voltage.nominal	`24.0`
driver.name	`usbhid-ups`
driver.parameter.pollfreq	`30`
driver.parameter.pollinterval	`2`
driver.parameter.port	`auto`
driver.version	`2.4.1`
driver.version.data	`APC HID 0.93`
driver.version.internal	`0.34`
input.voltage	`123.8`
output.voltage	`123.8`
output.voltage.nominal	`120.0`
ups.beeper.status	`enabled`
ups.delay.shutdown	`20`
ups.firmware	`617.3.D`
ups.firmware.aux	`1.5`
ups.load	`46.1`
ups.mfr	`American Power Conversion`
ups.mfr.date	`2003/07/01`
ups.model	`Smart-UPS 1500 RM`
ups.productid	`0002`
ups.serial	`AS0327210919`
ups.status	`OL`
ups.test.result	`No test initiated`
ups.timer.reboot	`-1`
ups.timer.shutdown	`-1`
ups.vendorid	`051d`

Report #2

This device is known to work with driver snmp-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Known supported variables

This device is known to support the following variables (values are just examples):

ambient.humidity	`-1.00`
ambient.temperature	`27.8`
battery.charge	`100.00`
battery.charge.restart	`0`
battery.current	`0.00`
battery.date	`01/16/07`
battery.packs	`0.00`
battery.packs.bad	`0.00`
battery.runtime	`1380.00`
battery.runtime.low	`120`
battery.voltage	`55.00`
battery.voltage.nominal	`0.00`
driver.name	`snmp-ups`
driver.parameter.pollfreq	`5`
driver.parameter.pollinterval	`2`
driver.parameter.port	`ups4`
driver.parameter.snmp_version	`v1`
driver.version	`2.4.1`
driver.version.internal	`0.44`
input.L1-L2.voltage	`0.00`
input.L1-L2.voltage.maximum	`0.00`
input.L1-L2.voltage.minimum	`0.00`
input.L1.current	`0.00`
input.L1.current.maximum	`0.00`
input.L1.current.minimum	`0.00`
input.frequency	`0.00`
input.phases	`0`
input.sensitivity	`high`
input.transfer.high	`127`
input.transfer.low	`106`
input.voltage	`120.00`
output.L1-L2.voltage	`0.00`
output.L1.current	`0.00`
output.L1.current.maximum	`0.00`
output.L1.current.minimum	`0.00`
output.L1.power	`0.00`
output.L1.power.maximum	`0.00`
output.L1.power.maximum.percent	`0.00`
output.L1.power.minimum	`0.00`
output.L1.power.minimum.percent	`0.00`
output.L1.power.percent	`0.00`
output.current	`6.00`
output.frequency	`60.00`
output.phases	`0`
output.voltage	`120.00`
output.voltage.nominal	`120`
ups.delay.shutdown	`90`
ups.delay.start	`0`
ups.firmware	`716.3.D`
ups.id	`ups4`
ups.load	`54.00`
ups.mfr	`APC`
ups.mfr.date	`01/16/07`
ups.model	`Smart-UPS 1500 XLM`
ups.serial	`QS0703121476`
ups.status	`OL`
ups.temperature	`25.00`
ups.test.result	`Ok`