Network UPS Tools - Smart-UPS 750

Click here to see reports of other supported models from APC.

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.7.2

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

This device is known to support the following variables (values are just examples):

battery.charge	`100`
battery.charge.low	`10`
battery.charge.warning	`50`
battery.runtime	`1980`
battery.runtime.low	`150`
battery.type	`PbAc`
battery.voltage	`27.0`
battery.voltage.nominal	`24.0`
device.mfr	`American Power Conversion`
device.model	`Smart-UPS 750`
device.serial	`3S1415X01827`
device.type	`ups`
driver.name	`usbhid-ups`
driver.parameter.pollfreq	`30`
driver.parameter.pollinterval	`2`
driver.parameter.port	`auto`
driver.version	`2.7.2`
driver.version.data	`APC HID 0.95`
driver.version.internal	`0.38`
ups.beeper.status	`enabled`
ups.delay.shutdown	`20`
ups.firmware	`UPS 08.8 / ID=18`
ups.mfr	`American Power Conversion`
ups.mfr.date	`2014/04/09`
ups.model	`Smart-UPS 750`
ups.productid	`0003`
ups.serial	`3S1415X01827`
ups.status	`OL`
ups.timer.reboot	`-1`
ups.timer.shutdown	`-1`
ups.vendorid	`051d`

This device is known to work with driver newhidups, now replaced by the usbhid-ups one.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

This device is known to support the following variables (values are just examples):