Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Asium.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.6.4

Report #1

This device is known to work with driver blazer_usb. It may also work with driver nutdrv_qx.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100

battery.voltage

13.50

battery.voltage.high

13.00

battery.voltage.low

10.40

battery.voltage.nominal

12.0

device.type

ups

driver.name

blazer_usb

driver.parameter.offdelay

30

driver.parameter.ondelay

40

driver.parameter.pollinterval

2

driver.parameter.port

auto

driver.parameter.vendorid

0665

driver.version

2.6.4

driver.version.internal

0.08

input.current.nominal

5.0

input.frequency

60.4

input.frequency.nominal

60

input.voltage

117.0

input.voltage.fault

117.0

input.voltage.nominal

120

output.voltage

117.0

ups.beeper.status

enabled

ups.delay.shutdown

30

ups.delay.start

2400

ups.load

25

ups.productid

5161

ups.status

OL

ups.temperature

25.0

does not change.

ups.type

offline / line interactive

ups.vendorid

0665