Network UPS Tools - Small Enterprise F6C1500-TW-RK

Click here to see reports of other supported models from Belkin.

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.4.3

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

This device is known to support the following variables (values are just examples):

battery.charge	`100`
battery.charge.low	`30`
battery.charge.warning	`30`
battery.runtime	`120`
battery.type	`PbAc`
battery.voltage	`27.8`
battery.voltage.nominal	`24`
device.mfr	`Belkin`
device.model	`Belkin UPS`
device.serial
device.type	`ups`
driver.name	`usbhid-ups`
driver.parameter.pollfreq	`30`
driver.parameter.pollinterval	`2`
driver.parameter.port	`/dev/hidraw2`
driver.version	`2.4.3-2672`
driver.version.data	`Belkin HID 0.12`
driver.version.internal	`0.35`
input.frequency	`60.0`
input.frequency.nominal	`60`
input.transfer.high	`140`
input.transfer.high.max	`144`
input.transfer.high.min	`140`
input.transfer.low	`88`
input.transfer.low.max	`88`
input.transfer.low.min	`84`
input.voltage	`125.9`
input.voltage.nominal	`120`
output.frequency	`60.0`
output.voltage	`126.5`
ups.beeper.status	`enabled`
ups.delay.shutdown	`20`
ups.delay.start	`30`
ups.firmware	`1`
ups.load	`30`
ups.mfr	`Belkin`
ups.model	`Belkin UPS`
ups.power.nominal	`1500`
ups.productid	`0751`
ups.serial
ups.status	`OL CHRG`
ups.test.result	`Done and passed`
ups.timer.shutdown	`0`
ups.timer.start	`0`
ups.type	`offline`
ups.vendorid	`050d`

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

This device is known to support the following variables (values are just examples):

battery.charge	`100`
battery.charge.low	`30`
battery.charge.warning	`30`
battery.runtime	`120`
battery.type	`PbAc`
battery.voltage	`27.7`
battery.voltage.nominal	`24`
driver.name	`usbhid-ups`
driver.parameter.pollfreq	`30`
driver.parameter.pollinterval	`2`
driver.parameter.port	`auto`
driver.version	`2.4.1`
driver.version.data	`Belkin HID 0.12`
driver.version.internal	`0.34`
input.frequency	`60.0`
input.frequency.nominal	`60`
input.transfer.high	`140`
input.transfer.high.max	`144`
input.transfer.high.min	`140`
input.transfer.low	`88`
input.transfer.low.max	`88`
input.transfer.low.min	`84`
input.voltage	`126.7`
input.voltage.nominal	`120`
output.frequency	`60.0`
output.voltage	`126.3`
ups.beeper.status	`enabled`
ups.delay.shutdown	`20`
ups.delay.start	`30`
ups.firmware	`1`
ups.load	`32`
ups.mfr	`Belkin`
ups.model	`Belkin UPS`
ups.power.nominal	`1500`
ups.productid	`0751`
ups.serial
ups.status	`OL CHRG`
ups.test.result	`Done and passed`
ups.timer.shutdown	`0`
ups.timer.start	`0`
ups.type	`offline`
ups.vendorid	`050d`

This device is known to work with driver newhidups, now replaced by the usbhid-ups one.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

This device is known to support the following variables (values are just examples):

This device is known to work with driver newhidups, now replaced by the usbhid-ups one.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

This device is known to support the following variables (values are just examples):

This device is known to work with driver belkin.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

This device is known to support the following variables (values are just examples):

This device is known to work with driver hidups, now replaced by the usbhid-ups one.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

This device is known to support the following variables (values are just examples):