Network UPS Tools - Universal UPS F6C1200-UNV

Click here to see reports of other supported models from Belkin.

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.2.0

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

This device is known to support the following variables (values are just examples):

battery.charge	`100`
battery.charge.low	`30`
battery.charge.warning	`50`
battery.runtime	`210`
battery.type	`PbAc`
battery.voltage	`27.1`
battery.voltage.nominal	`24`
driver.name	`usbhid-ups`
driver.parameter.pollfreq	`5`
driver.parameter.pollinterval	`2`
driver.parameter.port	`auto`
driver.version	`2.2.0-r1090`
driver.version.data	`Belkin HID 0.1`
driver.version.internal	`0.30`
input.frequency	`59.8`
input.frequency.nominal	`60`
input.sensitivity	`normal`
input.transfer.high	`136`
input.transfer.high.max	`141`
input.transfer.high.min	`131`
input.transfer.low	`90`
input.transfer.low.max	`95`
input.transfer.low.min	`85`
input.voltage	`123.3`
input.voltage.nominal	`120`
output.frequency	`59.8`
output.voltage	`122.7`
ups.beeper.status	`enabled`
ups.delay.restart	`0`
ups.delay.shutdown	`0`
ups.firmware	`4`
ups.load	`33`
ups.load.high	`100`
ups.mfr	`Belkin`
ups.mfr.date	`2002/03/01`
ups.model	`UPS`
ups.power.nominal	`1200`
ups.productid	`0912`
ups.serial	`<omitted>`
ups.status	`OL CHRG`
ups.test.result	`No test initiated`
ups.type	`offline`
ups.vendorid	`050d`

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

This device is known to support the following variables (values are just examples):

battery.charge	`100`
battery.charge.low	`30`
battery.charge.warning	`30`
battery.runtime	`120`
battery.type	`PbAc`
battery.voltage	`27.3`
battery.voltage.nominal	`24`
driver.name	`usbhid-ups`
driver.parameter.pollinterval	`2`
driver.parameter.port	`auto`
driver.version	`2.2.0-`
driver.version.data	`Belkin HID 0.1`
driver.version.internal	`0.30`
input.frequency	`50.0`
input.frequency.nominal	`50`
input.sensitivity	`normal` This variable can be set through upsrw to a string value.
input.transfer.high	`264` This variable can be set through upsrw to a string value.
input.transfer.high.max	`269`
input.transfer.high.min	`259`
input.transfer.low	`187` This variable can be set through upsrw to a string value.
input.transfer.low.max	`192`
input.transfer.low.min	`182`
input.voltage	`247.4`
input.voltage.nominal	`230`
output.frequency	`50.0`
output.voltage	`248.4`
ups.beeper.status	`enabled` This variable can be set through upsrw to a string value.
ups.delay.restart	`0`
ups.delay.shutdown	`0`
ups.firmware	`2`
ups.load	`52`
ups.load.high	`100`
ups.mfr	`Belkin`
ups.model	`UPS`
ups.power.nominal	`1200`
ups.productid	`0912`
ups.serial	`01`
ups.status	`OL CHRG`
ups.test.result	`Done and passed`
ups.type	`offline`
ups.vendorid	`050d`

This device is known to work with driver newhidups, now replaced by the usbhid-ups one.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

This device is known to support the following variables (values are just examples):

This device is known to work with driver newhidups, now replaced by the usbhid-ups one.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

This device is known to support the following variables (values are just examples):