Network UPS Tools - Universal UPS F6C800-UNV

Click here to see reports of other supported models from Belkin.

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.0.2

This device is known to work with driver newhidups, now replaced by the usbhid-ups one.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

This device is known to support the following variables (values are just examples):

battery.charge	`75`
battery.charge.low	`30`
battery.charge.warning	`50`
battery.runtime	`210`
battery.voltage	`26.1`
battery.voltage.nominal	`24`
driver.name	`newhidups`
driver.parameter.port	`auto`
driver.version	`2.0.2`
driver.version.data	`Belkin HID 0.1`
driver.version.internal	`0.27`
input.frequency	`59.9`
input.frequency.nominal	`60`
input.sensitivity	`reduced`
input.transfer.high	`136`
input.transfer.high.max	`0`
input.transfer.high.min	`1536` This is a garbage value created by a previous crash of the UPS firmware - should be `0`.
input.transfer.low	`90`
input.transfer.low.max	`0`
input.transfer.low.min	`0`
input.voltage	`117.4`
input.voltage.nominal	`120`
output.frequency	`59.9`
output.voltage	`118.1`
ups.beeper.status	`enabled`
ups.delay.restart	`0`
ups.delay.shutdown	`2`
ups.devicechemistry	`PbAc`
ups.firmware	`4`
ups.load	`0`
ups.mfr	`Belkin`
ups.mfr.date	`2002/03/01`
ups.model	`UPS`
ups.power.nominal	`800`
ups.serial	`unknown`
ups.serial.internal	`D2002337105`
ups.status	`OL CHRG`
ups.test.result	`Done and passed`
ups.type	`offline`

This device is known to support the following NUT’s instant commands: