Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from CABAC.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.6.4

Report #1

This device is known to work with driver blazer_usb. It may also work with driver nutdrv_qx.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100

battery.voltage

26.00

battery.voltage.high

25.46

battery.voltage.low

20.37

battery.voltage.nominal

23.5

device.mfr

KEBO

device.model

UPS 1700VA

device.type

ups

driver.name

blazer_usb

driver.parameter.pollinterval

2

driver.parameter.port

auto

driver.version

2.6.4

driver.version.internal

0.08

input.current.nominal

10.0

input.frequency

50.0

input.frequency.nominal

50

input.voltage

253.0

input.voltage.fault

165.0

input.voltage.nominal

240

output.voltage

228.0

ups.beeper.status

disabled

ups.delay.shutdown

30

ups.delay.start

180

ups.firmware

VER7.02

ups.load

20

ups.mfr

KEBO

ups.model

UPS 1700VA

ups.productid

0000

ups.status

OL

ups.temperature

0.0

ups.type

offline / line interactive

ups.vendorid

0001