Network UPS Tools - OR700LCDRM1U

Click here to see reports of other supported models from Cyber Power Systems.

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.6.1

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

This device is known to support the following variables (values are just examples):

battery.charge	`100`
battery.charge.low	`10` This variable can be set through upsrw to a string value.
battery.charge.warning	`20`
battery.mfr.date	`CPS`
battery.runtime	`6000`
battery.runtime.low	`300` This variable can be set through upsrw to a string value.
battery.type	`PbAcid`
battery.voltage	`14.5`
battery.voltage.nominal	`12`
device.mfr	`CPS`
device.model	`UPS OR700`
device.type	`ups`
driver.name	`usbhid-ups`
driver.parameter.pollfreq	`30`
driver.parameter.pollinterval	`2`
driver.parameter.port	`auto`
driver.version	`2.6.1`
driver.version.data	`CyberPower HID 0.3`
driver.version.internal	`0.35`
input.transfer.high	`140` This variable can be set through upsrw to a string value.
input.transfer.low	`90` This variable can be set through upsrw to a string value.
input.voltage	`119.0`
input.voltage.nominal	`120`
output.voltage	`119.0`
ups.beeper.status	`enabled`
ups.delay.shutdown	`20` This variable can be set through upsrw to a string value.
ups.delay.start	`30` This variable can be set through upsrw to a string value.
ups.load	`0`
ups.mfr	`CPS`
ups.model	`UPS OR700`
ups.productid	`0601`
ups.realpower.nominal	`400`
ups.status	`OL`
ups.test.result	`Done and passed`
ups.timer.shutdown	`-60`
ups.timer.start	`-60`
ups.vendorid	`0764`

This device is known to support the following NUT’s instant commands: