Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Cyber Power Systems.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.2.2

Report #1

This device is known to work with driver powerpanel.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100

battery.charge.low

45

driver.name

powerpanel

driver.parameter.pollinterval

2

driver.parameter.port

/dev/ttyS0

driver.version

2.2.2

driver.version.internal

0.23

input.frequency

20.0

input.frequency.nominal

50

input.transfer.high

147

input.transfer.low

88

input.voltage

176

input.voltage.nominal

230

output.voltage

176

output.voltage.nominal

120

ups.beeper.status

enabled

ups.firmware

1.100

ups.load

24

ups.mfr

CyberPower

ups.model

PR3000E

ups.serial

[unknown]

ups.start.battery

yes

ups.status

OL

ups.temperature

41