Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Cyber Power Systems.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.7.4

Report #1

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100

battery.charge.low

10

This variable can be set through upsrw to a string value upto the length of 10 characters.
battery.charge.warning

20

battery.mfr.date

CPS

battery.runtime

14100

battery.runtime.low

300

This variable can be set through upsrw to a string value upto the length of 10 characters.
battery.type

PbAcid

battery.voltage

28.2

battery.voltage.nominal

24

device.mfr

CPS

device.model

ValueII_1200E

device.type

ups

driver.name

usbhid-ups

driver.parameter.pollfreq

30

driver.parameter.pollinterval

2

driver.parameter.port

auto

driver.parameter.synchronous

no

driver.version

2.7.4

driver.version.data

CyberPower HID 0.4

driver.version.internal

0.41

input.transfer.high

295

This variable can be set through upsrw to a string value upto the length of 10 characters.
input.transfer.low

167

This variable can be set through upsrw to a string value upto the length of 10 characters.
input.voltage

247.0

input.voltage.nominal

230

output.voltage

247.0

ups.beeper.status

enabled

ups.delay.shutdown

20

This variable can be set through upsrw to a string value upto the length of 10 characters.
ups.delay.start

30

This variable can be set through upsrw to a string value upto the length of 10 characters.
ups.load

8

ups.mfr

CPS

ups.model

ValueII_1200E

ups.productid

0501

ups.realpower.nominal

720

ups.status

OL

ups.test.result

No test initiated

ups.timer.shutdown

-60

ups.timer.start

-60

ups.vendorid

0764

Known supported commands

This device is known to support the following NUT’s instant commands:

  • beeper.disable

  • beeper.enable

  • beeper.mute

  • beeper.off

  • beeper.on

  • load.off

  • load.off.delay

  • load.on

  • load.on.delay

  • shutdown.return

  • shutdown.stayoff

  • shutdown.stop

  • test.battery.start.deep

  • test.battery.start.quick

  • test.battery.stop