Network UPS Tools - UPS Tower 1920W HV

Click here to see reports of other supported models from Dell.

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.6.0

This device is known to work with driver snmp-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

This device is known to support the following variables (values are just examples):

battery.charge	`100.00`
battery.current	`0.00`
battery.runtime	`23100.00`
battery.runtime.low	`1800.00`
battery.temperature	`0.00`
battery.voltage	`77.00`
beeper.status	`disabled`
device.mfr	`DELL`
device.model	`Dell UPS Tower 1920W HV`
device.type	`ups`
driver.name	`snmp-ups`
driver.parameter.mibs	`ietf`
driver.parameter.pollinterval	`2`
driver.parameter.port	`166.99.250.11`
driver.version	`2.6.0-2910:2912M`
driver.version.internal	`0.50 (mib: ietf 1.3)`
input.bypass.phases	`0.00`
input.current	`0.10`
input.frequency	`49.90`
input.frequency.nominal	`50.00`
input.phases	`1.00`
input.realpower	`0.00`
input.transfer.high	`0.00`
input.transfer.low	`166.00`
input.voltage	`230.00`
input.voltage.nominal	`240.00`
output.current	`0.00`
output.frequency	`49.90`
output.frequency.nominal	`50.00`
output.phases	`1.00`
output.power.nominal	`1920.00`
output.realpower	`0.00`
output.realpower.nominal	`1920.00`
output.voltage	`232.00`
output.voltage.nominal	`240.00`
ups.firmware	`01.04.0001`
ups.firmware.aux	`01.04.9007`
ups.load	`0.00`
ups.mfr	`DELL`
ups.model	`Dell UPS Tower 1920W HV`
ups.status	`OL`
ups.test.result	`no test initiated`
ups.timer.shutdown	`-1`
ups.timer.start	`-1`