Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Eaton.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.6.5

Report #1

This device is known to work with driver bcmxcp_usb.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Known supported variables

This device is known to support the following variables (values are just examples):

ambient.temperature.high

1

battery.charge.low

11

battery.voltage

13.7

device.mfr

Eaton

device.model

POWERWARE UPS 700i

device.serial


device.type

ups

driver.name

bcmxcp_usb

driver.parameter.pollinterval

2

driver.parameter.port

auto

driver.parameter.shutdown_delay

60

driver.version

2.6.5

driver.version.internal

0.26

input.frequency

49.9

input.frequency.high

55

input.frequency.low

45

input.frequency.nominal

50

input.transfer.boost.high

207

input.transfer.high

275

input.transfer.low

178

input.transfer.trim.low

250

input.voltage

238

input.voltage.nominal

230

output.current

0.6

output.current.nominal

1.8

output.frequency

49.9

output.phases

1

output.voltage

238

output.voltage.nominal

230

ups.beeper.status

enabled

ups.firmware

Cont:00.50 Inve:01.50

ups.load

33.3

ups.mfr

Eaton

ups.model

POWERWARE UPS 700i

ups.power.nominal

700

ups.serial


ups.status

OL

ups.test.result

Done and passed