Network UPS Tools - 5E1100iUSB

Click here to see reports of other supported models from Eaton.

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.7.1

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

This device is known to support the following variables (values are just examples):

battery.charge	`100`
battery.runtime	`3160`
battery.type	`PbAc`
device.mfr	`EATON`
device.model	`5E 1100i`
device.type	`ups`
driver.name	`usbhid-ups`
driver.parameter.pollfreq	`30`
driver.parameter.pollinterval	`2`
driver.parameter.port	`auto`
driver.parameter.vendorid	`0463`
driver.version	`2.7.1`
driver.version.data	`MGE HID 1.32`
driver.version.internal	`0.38`
input.voltage	`227.0`
outlet.1.status	`on`
outlet.desc	`Main Outlet` This variable can be set through upsrw to a string value upto the length of `20` characters.
outlet.id	`1`
outlet.switchable	`no`
output.frequency	`49.9`
output.frequency.nominal	`50`
output.voltage	`228.0`
output.voltage.nominal	`230` This variable can be set through upsrw to one of the following values: `200` `208` `220` `230` `240`
ups.beeper.status	`enabled`
ups.delay.shutdown	`20` This variable can be set through upsrw to a string value upto the length of `10` characters.
ups.firmware	`01.04.0018`
ups.load	`8`
ups.mfr	`EATON`
ups.model	`5E 1100i`
ups.power.nominal	`1100`
ups.productid	`ffff`
ups.start.battery	`yes` This variable can be set through upsrw to a string value upto the length of `5` characters.
ups.status	`OL CHRG`
ups.timer.shutdown	`-1`
ups.vendorid	`0463`

This device is known to support the following NUT’s instant commands: