Network UPS Tools

Click here to see reports of other supported models from Eaton.

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.4.3

Report #1

This device is known to work with driver snmp-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Known supported variables

This device is known to support the following variables (values are just examples):

ambient.temperature	`27.0`
ambient.temperature.high	`50.00`
ambient.temperature.low	`0.00`
battery.charge	`100.00`
battery.current	`0.00`
battery.runtime	`1659.00`
battery.runtime.low	`1`
battery.voltage	`515.00`
device.mfr	`Powerware Corporation`
device.model	`Physics/Astronomy`
device.type	`ups`
driver.name	`snmp-ups`
driver.parameter.pollinterval	`2`
driver.parameter.port	`192.168.10.25`
driver.version	`2.4.3`
driver.version.internal	`0.47 (mib: pw 0.6.1)`
input.L1-N.voltage	`249.00`
input.L1.current	`183.00`
input.L1.realpower	`42182.00`
input.L2-N.voltage	`250.00`
input.L2.current	`184.00`
input.L2.realpower	`42366.00`
input.L3-N.voltage	`250.00`
input.L3.current	`184.00`
input.L3.realpower	`42251.00`
input.bypass.L1-N.voltage	`249.00`
input.bypass.L2-N.voltage	`250.00`
input.bypass.L3-N.voltage	`251.00`
input.frequency	`50.10`
input.phases	`3.00`
input.quality	`0.00`
input.voltage.nominal	`239.00`
output.L1-N.voltage	`240.00`
output.L1.current	`150.00`
output.L1.power.percent	`25.00`
output.L1.realpower	`34656.00`
output.L2-N.voltage	`240.00`
output.L2.current	`189.00`
output.L2.power.percent	`32.00`
output.L2.realpower	`43783.00`
output.L3-N.voltage	`240.00`
output.L3.current	`168.00`
output.L3.power.percent	`28.00`
output.L3.realpower	`38859.00`
output.frequency	`50.10`
output.frequency.nominal	`50.00`
output.phases	`3.00`
output.voltage.nominal	`239.00`
ups.firmware	`FP: 1.38 INV: 1.38 RCT: 1.38 IFC: 1.10`
ups.firmware.aux	`ConnectUPS Web/SNMP Card V4.30`
ups.mfr	`Powerware Corporation`
ups.model	`Physics/Astronomy`
ups.power	`34656.00`
ups.power.nominal	`450000.00`
ups.realpower.nominal	`409000.00`
ups.status	`OL`
ups.test.result	`Done and passed`
ups.type	`parallel redundancy`
vendor.specific.abmstatus	`Battery Resting`

9395

2.4.3

Report #1

Known supported variables