Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Eaton.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.6.5

Report #1

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

23

battery.charge.low

20

This variable can be set through upsrw to a string value.

battery.runtime

208

battery.type

PbAc

device.mfr

EATON

device.model

Protection Station 650

device.serial

AN2E49008

device.type

ups

driver.name

usbhid-ups

driver.parameter.bus

002

driver.parameter.pollfreq

30

driver.parameter.pollinterval

2

driver.parameter.port

auto

driver.parameter.product

Protection Station

driver.parameter.productid

FFFF

driver.parameter.serial

AN2E49008

driver.parameter.vendor

EATON

driver.parameter.vendorid

0463

driver.version

2.6.5

driver.version.data

MGE HID 1.31

driver.version.internal

0.37

input.transfer.high

264

This variable can be set through upsrw to a string value.

input.transfer.low

184

This variable can be set through upsrw to a string value.

outlet.1.desc

PowerShare Outlet 1

This variable can be set through upsrw to a string value.

outlet.1.id

2

outlet.1.status

on

outlet.1.switchable

no

outlet.2.desc

PowerShare Outlet 2

This variable can be set through upsrw to a string value.

outlet.2.id

3

outlet.2.status

on

outlet.2.switchable

no

This variable can be set through upsrw to a string value.

outlet.desc

Main Outlet

This variable can be set through upsrw to a string value.

outlet.id

1

outlet.power

25

This variable can be set through upsrw to one of the following values:

  • 10

  • 25

  • 60

outlet.switchable

no

output.frequency.nominal

50

output.voltage

230.0

output.voltage.nominal

230

This variable can be set through upsrw to one of the following values:

  • 220

  • 230

  • 240

ups.beeper.status

enabled

ups.delay.shutdown

20

This variable can be set through upsrw to a string value.

ups.delay.start

30

This variable can be set through upsrw to a string value.

ups.firmware

1.13

ups.load

16

ups.mfr

EATON

ups.model

Protection Station 650

ups.power.nominal

650

ups.productid

ffff

ups.serial

AN2E49008

ups.status

OL CHRG

ups.timer.shutdown

0

ups.timer.start

0

ups.vendorid

0463