Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Geek Squad.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.0.5

Report #1

This device is known to work with driver newhidups, now replaced by the usbhid-ups one.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100

battery.charge.low

10

battery.charge.warning

20

battery.runtime

4251

battery.runtime.low

600

battery.type

PbAcid

battery.voltage

20.9

battery.voltage.nominal

12.0

driver.name

newhidups

driver.parameter.port

auto

driver.version

2.0.5

driver.version.data

APC/CyberPower HID 0.9

driver.version.internal

0.30

input.transfer.high

140

input.transfer.low

90

input.voltage

121.0

input.voltage.nominal

120

output.voltage

121.0

ups.beeper.status

enabled

ups.delay.shutdown

-60

ups.load

6.0

ups.mfr

CPS

ups.model

GS 1285U

ups.power.nominal

337

ups.status

OL

ups.test.result

Done and passed