Network UPS Tools - PR-3000-HS

Click here to see reports of other supported models from Grafenthal.

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.6.5

This device is known to work with driver snmp-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

This device is known to support the following variables (values are just examples):

battery.charge	`0.00`
battery.current	`0.00`
battery.runtime	`0.00`
battery.runtime.low	`7200.00`
battery.temperature	`21.00`
battery.voltage	`2.10`
device.mfr
device.model	`HV 3K`
device.type	`ups`
driver.name	`snmp-ups`
driver.parameter.pollinterval	`2`
driver.parameter.port	`192.168.4.32`
driver.version	`2.6.5-3723:3731M`
driver.version.data	`ietf MIB 1.4`
driver.version.internal	`0.68`
input.bypass.phases	`0.00`
input.current	`0.00`
input.frequency	`50.00`
input.frequency.nominal	`50.00`
input.phases	`1.00`
input.realpower	`0.00`
input.transfer.high	`0.00`
input.transfer.low	`0.00`
input.voltage	`224.00`
input.voltage.nominal	`2300.00`
output.current	`0.00`
output.frequency	`50.00`
output.frequency.nominal	`50.00`
output.phases	`1.00`
output.power.nominal	`2990.00`
output.realpower	`0.00`
output.realpower.nominal	`0.00`
output.voltage	`230.00`
output.voltage.nominal	`2300.00`
ups.beeper.status	`enabled`
ups.firmware	`00204.02`
ups.firmware.aux	`3.2.DX520.c`
ups.load	`9.00`
ups.mfr
ups.model	`HV 3K`
ups.start.auto	`no`
ups.status	`OL`
ups.test.result	`done and passed`
ups.timer.reboot	`-1` This variable can be set through upsrw to a string value.
ups.timer.shutdown	`-1` This variable can be set through upsrw to a string value.
ups.timer.start	`-1` This variable can be set through upsrw to a string value.

This device is known to support the following NUT’s instant commands: