Network UPS Tools - R12000-3UPS

Click here to see reports of other supported models from HP.

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.7.1

Report #1

This device is known to work with driver snmp-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Known supported variables

This device is known to support the following variables (values are just examples):

ambient.temperature	`19.0`
ambient.temperature.high	`0.00`
ambient.temperature.low	`0.00`
battery.charge	`94.00`
battery.current	`0.00`
battery.runtime	`4620.00`
battery.voltage	`27.70`
device.mfr	`Hewlett-Packard`
device.model	`HP R12000/3UPS`
device.serial	`P38900C9VY8077`
device.type	`ups`
driver.name	`snmp-ups`
driver.parameter.pollfreq	`15`
driver.parameter.pollinterval	`2`
driver.parameter.port	`10.2.1.226`
driver.parameter.snmp_version	`v1`
driver.version	`2.7.1`
driver.version.data	`cpqpower MIB 1.5`
driver.version.internal	`0.70`
input.L1-N.voltage	`224.00`
input.L1.current	`0.70`
input.L1.realpower	`0.00`
input.L2-N.voltage	`223.00`
input.L2.current	`1.00`
input.L2.realpower	`0.00`
input.L3-N.voltage	`223.00`
input.L3.current	`0.60`
input.L3.realpower	`0.00`
input.frequency	`50.00`
input.phases	`3.00`
input.quality	`0.00`
outlet.count	`0.00`
outlet.desc	`All outlets`
outlet.id	`0`
output.L1-N.voltage	`224.00`
output.L1.current	`0.60`
output.L2-N.voltage	`223.00`
output.L2.current	`0.90`
output.L3-N.voltage	`225.00`
output.L3.current	`0.50`
output.frequency	`50.00`
output.phases	`3.00`
ups.L1.realpower	`86.00`
ups.L2.realpower	`140.80`
ups.L3.realpower	`81.60`
ups.delay.shutdown	`20`
ups.delay.start	`30`
ups.firmware	`2.02`
ups.load	`25.00`
ups.mfr	`Hewlett-Packard`
ups.model	`HP R12000/3UPS`
ups.serial	`P38900C9VY8077`
ups.status	`OL DISCHRG OB` Actually the UPS is online, battery is charging.
ups.test.result	`Unknown`
ups.timer.shutdown	`0.00`
ups.timer.start	`0.00`
ups.type	`normal`

About this device

UPS fitted with an AF430A management card.

2.6.5