Network UPS Tools - RT3000 G2

Click here to see reports of other supported models from HP.

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.6.5

This device is known to work with driver snmp-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

This device is known to support the following variables (values are just examples):

ambient.temperature	`28.0`
ambient.temperature.high	`40.00`
ambient.temperature.low	`0.00`
battery.charge	`99.00`
battery.current	`0.00`
battery.runtime	`7440.00`
battery.voltage	`13.10`
device.mfr	`HP`
device.model	`HP RT3000 G2 UPS`
device.serial	`3C83435450`
device.type	`ups`
driver.name	`snmp-ups`
driver.parameter.mibs	`auto`
driver.parameter.pollfreq	`15`
driver.parameter.pollinterval	`2`
driver.parameter.port	`mcups1.cal.org`
driver.parameter.snmp_version	`v1`
driver.version	`2.6.5`
driver.version.data	`cpqpower MIB 1.5`
driver.version.internal	`0.68`
input.current	`0.40`
input.frequency	`50.00`
input.phases	`1.00`
input.quality	`2.00`
input.voltage	`209.00`
input.voltage.nominal	`230`
outlet.1.id	`1.00`
outlet.1.status	`on`
outlet.1.switchable	`yes`
outlet.2.id	`2.00`
outlet.2.status	`on`
outlet.2.switchable	`yes`
outlet.count	`2.00`
outlet.desc	`All outlets`
outlet.id	`0`
output.current	`0.20`
output.frequency	`50.00`
output.frequency.nominal	`500`
output.phases	`1.00`
output.voltage	`223.00`
output.voltage.nominal	`230`
ups.delay.shutdown	`20`
ups.delay.start	`30`
ups.firmware	`01.06.0026;01.02.0004`
ups.load	`19.00`
ups.mfr	`HP`
ups.model	`HP RT3000 G2 UPS`
ups.realpower	`3000.00`
ups.serial	`3C83435450`
ups.status	`OL OB` Actually the UPS is online.
ups.test.result	`Unknown`
ups.timer.shutdown	`0.00`
ups.timer.start	`0.00`
ups.type	`normal`

UPS fitted with an AF465A management card.