Network UPS Tools

Click here to see reports of other supported models from HP.

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.4.1

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

This device is known to support the following variables (values are just examples):

battery.charge	`91`
battery.charge.low	`10` This variable can be set through upsrw to a string value.
battery.charge.warning	`30`
battery.temperature	`37.9`
battery.type	`PbAc`
battery.voltage	`25.1`
battery.voltage.nominal	`24.0`
driver.name	`usbhid-ups`
driver.parameter.pollfreq	`30`
driver.parameter.pollinterval	`2`
driver.parameter.port	`auto`
driver.version	`2.4.1`
driver.version.data	`TrippLite HID 0.4`
driver.version.internal	`0.34`
input.frequency	`49.9`
input.transfer.high	`277.0` This variable can be set through upsrw to a string value.
input.transfer.low	`158.0` This variable can be set through upsrw to a string value.
input.voltage	`224.4`
input.voltage.nominal	`230`
output.frequency	`49.9`
output.frequency.nominal	`50`
output.voltage	`223.3`
output.voltage.nominal	`230`
ups.beeper.status	`enabled`
ups.delay.shutdown	`20` This variable can be set through upsrw to a string value.
ups.delay.start	`30` This variable can be set through upsrw to a string value.
ups.load	`59`
ups.mfr	`Hewlett-Packard`
ups.model	`T750 INTL`
ups.power.nominal	`750`
ups.productid	`1f06`
ups.serial	`2CJ5380638`
ups.status	`OL CHRG`
ups.timer.reboot	`-1`
ups.timer.shutdown	`-1`
ups.timer.start	`-1`
ups.vendorid	`03f0`

This device is known to support the following NUT’s instant commands: