Network UPS Tools - 1440VA-1000W Rack HV UPS

Click here to see reports of other supported models from IBM.

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.6.1

This device is known to work with driver snmp-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

This device is known to support the following variables (values are just examples):

battery.charge	`92.00`
battery.current	`0.00`
battery.runtime	`21420.00`
battery.runtime.low	`180.00`
battery.temperature	`0.00`
battery.voltage	`41.00`
beeper.status	`enabled`
device.mfr	`IBM`
device.model	`IBM 1440VA/1000W Rack HV UPS`
device.type	`ups`
driver.name	`snmp-ups`
driver.parameter.mibs	`ietf`
driver.parameter.pollinterval	`2`
driver.parameter.port	`166.99.224.166`
driver.version	`2.6.1`
driver.version.internal	`0.50 (mib: ietf 1.3)`
input.bypass.phases	`0.00`
input.current	`0.00`
input.frequency	`49.90`
input.frequency.nominal	`50.00`
input.phases	`1.00`
input.realpower	`0.00`
input.transfer.high	`286.00`
input.transfer.low	`160.00`
input.voltage	`239.00`
input.voltage.nominal	`230.00`
output.current	`0.00`
output.frequency	`0.00`
output.frequency.nominal	`50.00`
output.phases	`1.00`
output.power.nominal	`1440.00`
output.realpower	`0.00`
output.realpower.nominal	`1000.00`
output.voltage	`0.00`
output.voltage.nominal	`230.00`
ups.firmware	`INV: 01.02.0012`
ups.firmware.aux	`Network Management Card V6.00 01.05.0001`
ups.load	`0.00`
ups.mfr	`IBM`
ups.model	`IBM 1440VA/1000W Rack HV UPS`
ups.start.auto	`yes`
ups.status	`OFF`
ups.test.result	`done and passed`
ups.timer.reboot	`-1`
ups.timer.shutdown	`-1`
ups.timer.start	`-1`