Network UPS Tools - Keor Multiplug

Click here to see reports of other supported models from Legrand.

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.7.2

This device is known to work with driver nutdrv_qx.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

This device is known to support the following variables (values are just examples):

battery.charge	`100`
battery.voltage	`13.20`
battery.voltage.high	`13.00`
battery.voltage.low	`10.40`
battery.voltage.nominal	`12.0`
device.type	`ups`
driver.name	`nutdrv_qx`
driver.parameter.pollfreq	`30`
driver.parameter.pollinterval	`2`
driver.parameter.port	`auto`
driver.version	`2.7.2`
driver.version.data	`Voltronic-QS 0.01`
driver.version.internal	`0.06`
input.current.nominal	`3.0`
input.frequency	`50.0`
input.frequency.nominal	`50`
input.voltage	`227.9`
input.voltage.fault	`226.1`
input.voltage.nominal	`230`
output.voltage	`226.1`
ups.beeper.status	`enabled`
ups.delay.shutdown	`30`
ups.delay.start	`180`
ups.firmware.aux	`PMV`
ups.productid	`5161`
ups.status	`OL`
ups.type	`offline / line interactive`
ups.vendorid	`0665`

This device is known to support the following NUT’s instant commands:

This device is known to work with driver blazer_usb. It may also work with driver nutdrv_qx.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

This device is known to support the following variables (values are just examples):

battery.charge	`100`
battery.voltage	`13.70`
battery.voltage.high	`13.00`
battery.voltage.low	`10.40`
battery.voltage.nominal	`12.0`
device.type	`ups`
driver.name	`blazer_usb`
driver.parameter.pollinterval	`2`
driver.parameter.port	`auto`
driver.version	`2.7.1`
driver.version.internal	`0.10`
input.current.nominal	`3.0`
input.frequency	`49.6`
input.frequency.nominal	`50`
input.voltage	`222.4`
input.voltage.fault	`222.4`
input.voltage.nominal	`230`
output.voltage	`224.2`
ups.beeper.status	`enabled`
ups.delay.shutdown	`30`
ups.delay.start	`180`
ups.productid	`5161`
ups.status	`OL`
ups.type	`offline / line interactive`
ups.vendorid	`0665`

This device is known to support the following NUT’s instant commands: