Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Liebert.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.6.0

Report #1

This device is known to work with driver blazer_usb. It may also work with driver nutdrv_qx.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.voltage

27.20

battery.voltage.nominal

24.0

beeper.status

enabled

device.mfr


device.model

PSA

device.type

ups

driver.name

blazer_usb

driver.parameter.pollinterval

2

driver.parameter.port

auto

driver.version

2.6.0

driver.version.internal

0.03

input.current.nominal

0.0

input.frequency

50.0

input.frequency.nominal

50

input.voltage

242.5

input.voltage.fault

140.0

input.voltage.nominal

230

output.voltage

240.0

ups.delay.shutdown

30

ups.delay.start

180

ups.firmware

VT17077Q

ups.load

14

ups.mfr


ups.model

PSA

ups.productid

0000

ups.status

OL

ups.temperature

30.0

ups.type

offline / line interactive

ups.vendorid

ffff