Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from MGE UPS SYSTEMS.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.0.4

Report #1

This device is known to work with driver mge-shut.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

86

battery.charge.low

30

battery.runtime

1475

driver.name

mge-shut

driver.parameter.port

/dev/ttyS1

driver.version

2.0.4

driver.version.internal

0.66

outlet.0.desc

Main Outlet

outlet.0.id

1

outlet.0.switchable

0

outlet.1.autoswitch.charge.low

0

outlet.1.desc

PowerShare Outlet 1

outlet.1.id

2

outlet.1.switch

1

outlet.1.switchable

0

output.voltage

230

ups.delay.shutdown

-1

ups.delay.start

-1

ups.load

0

ups.mfr

MGE UPS SYSTEMS

ups.model

ellipse 800

ups.power.nominal

800

ups.serial

unknown

ups.status

OL CHRG