Click here to see reports of other supported models from MGE UPS SYSTEMS.
When a user reports that a variable/command is not right then it will be highlighted by a red underline. Bad values/ranges/etc… will get a red dashed outline or red solid left border. The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left. |
2.4.3
Report #1
This device is known to work with driver usbhid-ups.
You can grab a dummy-ups compliant .dev
file to simulate this device clicking here.
Known supported variables
This device is known to support the following variables (values are just examples):
battery.charge
|
|
battery.charge.low
|
This variable can be set through upsrw to a string value. |
battery.runtime
|
|
battery.type
|
|
device.mfr
|
|
device.model
|
|
device.serial
|
|
device.type
|
|
driver.name
|
|
driver.parameter.offdelay
|
|
driver.parameter.ondelay
|
|
driver.parameter.pollfreq
|
|
driver.parameter.pollinterval
|
|
driver.parameter.port
|
|
driver.version
|
|
driver.version.data
|
|
driver.version.internal
|
|
input.transfer.high
|
This variable can be set through upsrw to a string value. |
input.transfer.low
|
This variable can be set through upsrw to a string value. |
outlet.1.desc
|
This variable can be set through upsrw to a string value. |
outlet.1.id
|
|
outlet.1.status
|
|
outlet.1.switchable
|
|
outlet.desc
|
This variable can be set through upsrw to a string value. |
outlet.id
|
|
outlet.switchable
|
|
output.frequency.nominal
|
|
output.voltage
|
|
output.voltage.nominal
|
This variable can be set through upsrw to one of the following values:
|
ups.beeper.status
|
|
ups.delay.shutdown
|
This variable can be set through upsrw to a string value. |
ups.delay.start
|
This variable can be set through upsrw to a string value. |
ups.load
|
|
ups.mfr
|
|
ups.model
|
|
ups.power.nominal
|
|
ups.productid
|
|
ups.serial
|
|
ups.status
|
|
ups.timer.shutdown
|
|
ups.timer.start
|
|
ups.vendorid
|
|