Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from MGE UPS SYSTEMS.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.0.3

Report #1

This device is known to work with driver mge-shut.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

82

battery.charge.low

20

This variable can be set through upsrw to a string value.
battery.runtime

03979

driver.name

mge-shut

driver.parameter.offdelay

120

driver.parameter.ondelay

15

driver.parameter.port

/dev/ttyS1

driver.version

2.0.3

driver.version.internal

0.65

input.frequency

49

input.voltage

229

outlet.0.desc

Main Outlet

This variable can be set through upsrw to a string value.
outlet.0.id

0

outlet.0.switchable

1

outlet.1.autoswitch.charge.low

0

This variable can be set through upsrw to a string value.
outlet.1.delay.shutdown

-1

This variable can be set through upsrw to a string value.
outlet.1.delay.start

-1

This variable can be set through upsrw to a string value.
outlet.1.desc

PowerShare Outlet 1

This variable can be set through upsrw to a string value.
outlet.1.id

1

outlet.1.switch

1

This variable can be set through upsrw to a string value.
outlet.1.switchable

1

outlet.2.autoswitch.charge.low

0

This variable can be set through upsrw to a string value.
outlet.2.delay.shutdown

-1

This variable can be set through upsrw to a string value.
outlet.2.delay.start

-1

This variable can be set through upsrw to a string value.
outlet.2.desc

PowerShare Outlet 2

This variable can be set through upsrw to a string value.
outlet.2.id

2

outlet.2.switch

1

This variable can be set through upsrw to a string value.
outlet.2.switchable

1

output.frequency

49

output.voltage

230

output.voltage.target.battery

40

output.voltage.target.line

40

ups.delay.shutdown

-1

This variable can be set through upsrw to a string value.
ups.delay.start

-1

This variable can be set through upsrw to a string value.
ups.load

10

ups.mfr

MGE UPS SYSTEMS

ups.power.nominal

1000

ups.serial

1Y2G15069

ups.status

OL CHRG

ups.test.result

Done and passed