Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from MGE UPS SYSTEMS.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.0.2

Report #1

This device is known to work with driver mge-utalk.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100.0

battery.charge.low

30

battery.runtime

01480

battery.voltage

082.9

battery.voltage.nominal

072.0

driver.name

mge-utalk

driver.parameter.port

/dev/ttyS0

driver.version

2.0.2

driver.version.internal

0.85

input.frequency

60.00

input.transfer.boost.low

102.0

input.transfer.high

132.0

input.transfer.low

102.0

input.transfer.trim.high

132.0

input.voltage

113.7

output.current

004.7

output.voltage

112.8

ups.delay.shutdown

020

ups.delay.start

001

ups.firmware

unknown

ups.id

Evolutio 2200 20

ups.load

034.0

ups.mfr

MGE UPS SYSTEMS

ups.model

Evolution 2200

ups.status

BOOST BYPASS

ups.test.interval

10080