Network UPS Tools - 2000 Plus

Click here to see reports of other supported models from NUMERIC.

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.4.1

This device is known to work with driver megatec, now replaced by the blazer_ser one. It may also work with driver nutdrv_qx.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

This device is known to support the following variables (values are just examples):

battery.charge	`100.0`
battery.voltage	`41.00`
battery.voltage.nominal	`36.0`
driver.name	`megatec`
driver.parameter.battvolts	`30.4:41.0`
driver.parameter.lowbatt	`25`
driver.parameter.pollinterval	`2`
driver.parameter.port	`/dev/upslink`
driver.version	`2.4.1`
driver.version.internal	`1.6`
input.frequency	`49.2`
input.frequency.nominal	`50.0`
input.voltage	`210.1`
input.voltage.fault	`210.1`
input.voltage.maximum	`213.1`
input.voltage.minimum	`208.6`
input.voltage.nominal	`230.0`
output.voltage	`209.0`
ups.beeper.status	`enabled`
ups.delay.shutdown	`0`
ups.delay.start	`2`
ups.load	`12.0`
ups.mfr	`NUMERIC`
ups.model	`2000 Plus VER 40643N`
ups.serial	`unknown`
ups.status	`OL`
ups.temperature	`40.0`
ups.type	`standby`

This device is known to work with driver blazer_ser. It may also work with driver nutdrv_qx.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

This device is known to support the following variables (values are just examples):

battery.charge	`100`
battery.lowbatt	`25`
battery.voltage	`41.00`
battery.voltage.high	`41.0`
battery.voltage.low	`30.4`
battery.voltage.nominal	`36.0`
beeper.status	`enabled`
driver.name	`blazer_ser`
driver.parameter.pollinterval	`2`
driver.parameter.port	`/dev/upslink`
driver.version	`2.4.1`
driver.version.internal	`1.51`
input.current.nominal	`8.7`
input.frequency	`49.5`
input.frequency.nominal	`50`
input.voltage	`225.1`
input.voltage.fault	`225.1`
input.voltage.nominal	`230`
output.voltage	`224.0`
ups.delay.shutdown	`30`
ups.delay.start	`180`
ups.firmware	`VER 40643N`
ups.load	`12`
ups.mfg	`NUMERIC`
ups.model	`2000 Plus`
ups.status	`OL`
ups.temperature	`46.0`
ups.type	`offline / line interactive`