Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from PowerWalker.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.7.4

Report #1

This device is known to work with driver nutdrv_qx.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

91

battery.energysave

no

This variable can be set through upsrw to one of the following values:

  • no

  • yes

battery.packs

1

This variable can be set through upsrw within the following ranges:

  • 1..99

battery.protection

yes

This variable can be set through upsrw to one of the following values:

  • no

  • yes

battery.runtime

240

battery.voltage

41.00

battery.voltage.nominal

36.0

device.model

OLHV1K0

device.type

ups

driver.name

nutdrv_qx

driver.parameter.pollfreq

30

driver.parameter.pollinterval

2

driver.parameter.port

auto

driver.parameter.synchronous

no

driver.version

2.7.4

driver.version.data

Voltronic 0.06

driver.version.internal

0.28

input.current.nominal

4.0

input.frequency

50.1

input.frequency.high

53.0

This variable can be set through upsrw within the following ranges:

  • 53..60

input.frequency.low

47.0

This variable can be set through upsrw within the following ranges:

  • 40..47

input.frequency.nominal

50.0

input.phases

1

input.transfer.high

242

This variable can be set through upsrw within the following ranges:

  • 237..254

input.transfer.high.max

254

input.transfer.high.min

237

input.transfer.low

218

This variable can be set through upsrw within the following ranges:

  • 206..223

input.transfer.low.max

223

input.transfer.low.min

206

input.voltage

229.2

input.voltage.nominal

230.0

outlet.0.switchable

no

This variable can be set through upsrw to one of the following values:

  • no

  • yes

output.current

0.0

output.current.nominal

4

output.frequency

0.0

output.frequency.nominal

50.0

output.phases

1

output.power.maximum.percent

0

output.power.minimum.percent

0

output.powerfactor

1.0

output.voltage

0.0

output.voltage.nominal

230.0

ups.beeper.status

disabled

ups.delay.shutdown

30

This variable can be set through upsrw within the following ranges:

  • 12..5940

ups.delay.start

180

This variable can be set through upsrw within the following ranges:

  • 0..599940

ups.firmware

01574.04

ups.firmware.aux

P01

ups.load

0

ups.power.nominal

1000

ups.productid

5161

ups.start.auto

yes

This variable can be set through upsrw to one of the following values:

  • no

  • yes

ups.start.battery

yes

This variable can be set through upsrw to one of the following values:

  • no

  • yes

ups.status

OL OFF

ups.temperature

25.8

ups.type

online

ups.vendorid

0665

Known supported commands

This device is known to support the following NUT’s instant commands:

  • beeper.disable

  • beeper.enable

  • beeper.toggle

  • bypass.start

  • bypass.stop

  • load.off

  • load.on

  • shutdown.return

  • shutdown.stayoff

  • shutdown.stop

  • test.battery.start

  • test.battery.start.deep

  • test.battery.start.quick

  • test.battery.stop