Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Powercom.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.6.5

Report #1

This device is known to work with driver blazer_ser. It may also work with driver nutdrv_qx.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

60

battery.voltage

270.00

battery.voltage.high

293.69

battery.voltage.low

234.95

battery.voltage.nominal

271.1

device.mfr

UPS

device.model

Model 20K

device.type

ups

driver.name

blazer_ser

driver.parameter.pollinterval

2

driver.parameter.port

com1

driver.version

2.6.5-3780M

driver.version.internal

1.55

input.current.nominal

86.0

input.frequency

49.9

input.frequency.nominal

50

input.voltage

226.0

input.voltage.fault

0.0

input.voltage.nominal

230

output.voltage

230.0

ups.beeper.status

disabled

ups.delay.shutdown

30

ups.delay.start

180

ups.firmware

Ver ST1.0

ups.load

26

ups.mfr

UPS

ups.model

Model 20K

ups.status

OL

ups.temperature

11.0

ups.type

online