Network UPS Tools

Click here to see reports of other supported models from Powerware.

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.6.1

This device is known to work with driver bcmxcp.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

This device is known to support the following variables (values are just examples):

battery.charge	`93`
battery.runtime	`1693`
battery.voltage	`12.71`
device.mfr	`Eaton`
device.model	`PW5115 500i`
device.serial	`XcensoredX`
device.type	`ups`
driver.name	`bcmxcp`
driver.parameter.pollinterval	`2`
driver.parameter.port	`/dev/ttyu0`
driver.version	`2.6.1`
driver.version.internal	`0.24`
ups.beeper.status	`enabled`
ups.firmware	`Cont:01.00 Inve:10.04`
ups.load	`20.4`
ups.mfr	`Eaton`
ups.model	`PW5115 500i`
ups.power	`102`
ups.power.nominal	`500`
ups.serial	`XcensoredX`
ups.status	`OL`

This device is known to work with driver bcmxcp.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

This device is known to support the following variables (values are just examples):

ambient.temperature	`37`
battery.charge	`90`
battery.runtime	`810`
battery.voltage	`13.47`
driver.name	`bcmxcp`
driver.parameter.baud_rate	`9600`
driver.parameter.pollinterval	`2`
driver.parameter.port	`/dev/ttyS0`
driver.parameter.shutdown_delay	`10`
driver.version	`2.3.0-1722M`
driver.version.internal	`0.19`
input.frequency	`50.34`
input.voltage	`226`
output.current	`0.68`
output.current.nominal	`2.27`
output.frequency	`50.00`
output.phases	`1`
output.voltage	`226`
output.voltage.nominal	`230`
ups.firmware	`Inve:01.04`
ups.load	`39.8`
ups.model	`PW5115 500i 500VA`
ups.power	`199`
ups.power.nominal	`500`
ups.serial	`XXXXXXXXXX`
ups.status	`OL`