Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Tripp Lite.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.6.3

Report #1

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100

battery.charge.low

10

This variable can be set through upsrw to a string value.
battery.charge.warning

30

battery.runtime

10800

battery.type

PbAC

battery.voltage

0.0

battery.voltage.nominal

24.0

device.mfr

Tripp Lite

device.model

TRIPP LITE UPS

device.serial

CCSYWWZZZZ

device.type

ups

driver.name

usbhid-ups

driver.parameter.pollfreq

30

driver.parameter.pollinterval

2

driver.parameter.port

auto

driver.parameter.productid

3016

driver.version

2.6.3

driver.version.data

TrippLite HID 0.6

driver.version.internal

0.35

input.frequency

5990.0

input.transfer.high

150.0

This variable can be set through upsrw to a string value.
input.transfer.low

92.0

This variable can be set through upsrw to a string value.
input.voltage

0.0

input.voltage.nominal

120

output.current

0.00

output.frequency

5990.0

output.frequency.nominal

60

output.voltage

0.0

output.voltage.nominal

120

ups.beeper.status

disabled

ups.delay.shutdown

20

This variable can be set through upsrw to a string value.
ups.delay.start

30

This variable can be set through upsrw to a string value.
ups.load

0

ups.mfr

Tripp Lite

ups.model

TRIPP LITE UPS

ups.power

0.0

ups.power.nominal

1500

ups.productid

3016

ups.serial

CCSYWWZZZZ

ups.status

OL

ups.timer.reboot

65535

ups.timer.shutdown

65535

ups.timer.start

65535

ups.vendorid

09ae

ups.watchdog.status

0

Known supported commands

This device is known to support the following NUT’s instant commands:

  • beeper.disable

  • beeper.enable

  • beeper.mute

  • beeper.off

  • beeper.on

  • load.off

  • load.off.delay

  • load.on

  • load.on.delay

  • reset.watchdog

  • shutdown.reboot

  • shutdown.return

  • shutdown.stayoff

  • shutdown.stop