Network UPS Tools - SMART1500RMXL2U

Table of Contents

Click here to see reports of other supported models from Tripp Lite.

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.1.0

Report #1

This device is known to work with driver tripplite_usb.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.voltage	`40.50`
battery.voltage.nominal	`36`
driver.name	`tripplite_usb`
driver.parameter.port	`auto`
driver.version	`2.1.0`
driver.version.internal	`0.6`
input.voltage	`115`
input.voltage.nominal	`120`
ups.debug.D	`37 33 38 39 0d 00 00 '7389...'`
ups.debug.M	`30 30 37 39 0d 00 00 '0079...'`
ups.debug.S	`31 30 30 00 5a 30 0d '100.Z0.'`
ups.debug.T	`36 38 32 35 38 31 0d '682581.'`
ups.delay.shutdown	`64`
ups.firmware	`F1218.A`
ups.load	`17`
ups.mfr	`Tripp Lite`
ups.model	`SMART1500RMXL2Ua`
ups.power.nominal	`1500`
ups.status	`OL`

2.0.0

Report #1

This device is known to work with driver snmp-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge	`100.0`
battery.voltage	`040.8`
driver.name	`snmp-ups`
driver.parameter.port	`tripplite1`
driver.version	`2.0.0`
driver.version.internal	`0.40`
input.frequency	`059.9`
input.voltage	`115.0`
ups.firmware.aux	`Tripp Lite 3.0.37 (GAPI 2.0)`
ups.load	`020.0`
ups.mfr	`Tripp Lite`
ups.model	`SMART1500RMXL2Ua`
ups.status	`OL`