Network UPS Tools - SMART2200RMXL2U

Click here to see reports of other supported models from Tripp Lite.

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.1.0

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

This device is known to support the following variables (values are just examples):

battery.charge	`100`
battery.charge.low	`10`
battery.charge.warning	`30`
battery.temperature	`33`
battery.type	`PbAC`
battery.voltage	`5.4`
battery.voltage.nominal	`48.0`
driver.name	`usbhid-ups`
driver.parameter.pollinterval	`2`
driver.parameter.port	`auto`
driver.parameter.productid	`3012`
driver.version	`2.1.0`
driver.version.data	`TrippLite HID 0.1 (experimental)`
driver.version.internal	`0.30`
input.frequency	`59.9`
input.transfer.high	`145.0`
input.transfer.low	`83.0`
input.voltage	`125.1`
input.voltage.nominal	`120`
output.frequency	`59.9`
output.frequency.nominal	`60`
output.voltage	`124.5`
output.voltage.nominal	`120`
ups.beeper.status	`enabled`
ups.delay.reboot	`-1`
ups.delay.restart	`-1`
ups.delay.shutdown	`-1`
ups.load	`43`
ups.mfr	`Tripp Lite`
ups.model	`TRIPP LITE SMART2200RMXL2U`
ups.power.nominal	`2200`
ups.productid	`3012`
ups.serial	`9550ALCSM538900110`
ups.status	`OL`
ups.test.result	`0`
ups.vendorid	`09ae`

This device is known to work with driver tripplite_usb.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

This device is known to support the following variables (values are just examples):