Network UPS Tools - SU1500RTXL2UA

Click here to see reports of other supported models from Tripp Lite.

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.6.3

Report #1

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge	`100`
battery.charge.low	`25` This variable can be set through upsrw to a string value.
battery.charge.warning	`50`
battery.temperature	`28.9`
battery.type	`PbAc`
battery.voltage	`51.9`
battery.voltage.nominal	`48.0`
device.mfr	`Tripp Lite`
device.model	`TRIPP LITE U`
device.serial
device.type	`ups`
driver.name	`usbhid-ups`
driver.parameter.pollfreq	`30`
driver.parameter.pollinterval	`2`
driver.parameter.port	`auto`
driver.version	`2.6.5-3780M`
driver.version.data	`TrippLite HID 0.8`
driver.version.internal	`0.37`
input.frequency	`59.9`
input.transfer.high	`138.0` This variable can be set through upsrw to a string value.
input.transfer.high.max	`138`
input.transfer.high.min	`133`
input.transfer.low	`65.0` This variable can be set through upsrw to a string value.
input.transfer.low.max	`70`
input.transfer.low.min	`65`
input.voltage	`123.6`
input.voltage.nominal	`120`
output.current	`0.00`
output.frequency	`59.9`
output.frequency.nominal	`60`
output.voltage	`120.2`
output.voltage.nominal	`120`
ups.beeper.status	`enabled`
ups.delay.shutdown	`20` This variable can be set through upsrw to a string value.
ups.delay.start	`30` This variable can be set through upsrw to a string value.
ups.firmware	`240`
ups.load	`0`
ups.mfr	`Tripp Lite`
ups.model	`TRIPP LITE U`
ups.power	`0.0`
ups.power.nominal	`1500`
ups.productid	`4004`
ups.serial
ups.status	`OL`
ups.timer.reboot	`-1`
ups.timer.shutdown	`-1`
ups.timer.start	`0`
ups.vendorid	`09ae`
ups.watchdog.status	`0`

Known supported commands

This device is known to support the following NUT’s instant commands:

beeper.disable
beeper.enable
beeper.mute
beeper.off
beeper.on
load.off
load.off.delay
load.on
load.on.delay
reset.watchdog
shutdown.reboot
shutdown.return
shutdown.stayoff
shutdown.stop
test.battery.start.deep
test.battery.start.quick
test.battery.stop

2.2.1

Report #1

This device is known to work with driver tripplitesu.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge	`100`
battery.temperature	`24`
battery.voltage	`52.2`
battery.voltage.nominal	`48`
driver.name	`tripplitesu`
driver.parameter.pollinterval	`2`
driver.parameter.port	`/dev/ttyS0`
driver.version	`2.2.1-`
driver.version.internal	`0.03`
input.frequency	`60.0`
input.transfer.high	`138`
input.transfer.low	`65`
input.voltage	`123.6`
input.voltage.nominal	`120`
output.current	`1.7`
output.frequency	`60.0`
output.voltage	`120.2`
output.voltage.nominal	`120`
ups.firmware	`13`
ups.load	`17`
ups.mfr	`Tripp Lite`
ups.model	`SU1500RTXL2Ua`
ups.status	`OL`
ups.test.result	`No test performed`

Report #2

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge	`100`
battery.charge.low	`25`
battery.charge.warning	`50`
battery.runtime	`2072`
battery.temperature	`27`
battery.type	`PbAc`
battery.voltage	`5.3`
battery.voltage.nominal	`48.0`
driver.name	`usbhid-ups`
driver.parameter.pollfreq	`30`
driver.parameter.pollinterval	`2`
driver.parameter.port	`auto`
driver.version	`2.2.1`
driver.version.data	`TrippLite HID 0.2 (experimental)`
driver.version.internal	`0.32`
input.frequency	`60.0`
input.transfer.high	`138.0`
input.transfer.low	`65.0`
input.voltage	`123.2`
input.voltage.nominal	`120`
output.current	`2.30`
output.frequency	`60.0`
output.frequency.nominal	`60`
output.voltage	`120.2`
output.voltage.nominal	`120`
ups.beeper.status	`enabled`
ups.delay.reboot	`-1`
ups.delay.shutdown	`-1`
ups.delay.start	`0`
ups.load	`23`
ups.mfr	`Tripp Lite`
ups.model	`TRIPP LITE UPS`
ups.power	`284.0`
ups.power.nominal	`1500`
ups.productid	`4003`
ups.serial	`9516ALCPS519400548`
ups.status	`OL`
ups.test.result	`Done and passed`
ups.vendorid	`09ae`

2.1.0

Report #1

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge	`100`
battery.charge.low	`25`
battery.charge.warning	`50`
battery.runtime	`1910`
battery.temperature	`22`
battery.type	`PbAc`
battery.voltage	`5.2`
battery.voltage.nominal	`48.0`
driver.name	`usbhid-ups`
driver.parameter.pollinterval	`2`
driver.parameter.port	`auto`
driver.version	`2.1.0`
driver.version.data	`TrippLite HID 0.1 (experimental)`
driver.version.internal	`0.30`
input.frequency	`59.9`
input.transfer.high	`138.0`
input.transfer.low	`65.0`
input.voltage	`124.8`
input.voltage.nominal	`120`
output.current	`2.80`
output.frequency	`59.9`
output.frequency.nominal	`60`
output.voltage	`120.2`
output.voltage.nominal	`120`
ups.beeper.status	`enabled`
ups.delay.reboot	`-1`
ups.delay.restart	`0`
ups.delay.shutdown	`-1`
ups.load	`24`
ups.mfr	`Tripp Lite`
ups.model	`TRIPP LITE UPS`
ups.power	`302.0`
ups.power.nominal	`1500`
ups.serial	`9530ALCPS519400017`
ups.status	`OL`

Known supported commands

This device is known to support the following NUT’s instant commands:

beeper.off
beeper.on
load.off
load.on
shutdown.return
shutdown.stop
test.battery.start.deep
test.battery.start.quick
test.battery.stop