Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Tripp Lite.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.6.5

Report #1

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100

battery.runtime

600

battery.type

PbAC

battery.voltage

13.5

battery.voltage.nominal

12.0

device.mfr

Tripp Lite

device.model

Tripp Lite UPS

device.type

ups

driver.name

usbhid-ups

driver.parameter.offdelay

90

driver.parameter.ondelay

120

driver.parameter.pollfreq

30

driver.parameter.pollinterval

2

driver.parameter.port

auto

driver.parameter.vendorid

09ae

driver.version

2.6.5

driver.version.data

TrippLite HID 0.8

driver.version.internal

0.37

input.frequency

60.1

input.voltage

118.8

input.voltage.nominal

120

output.frequency.nominal

60

output.voltage

118.8

output.voltage.nominal

120

ups.beeper.status

enabled

ups.delay.shutdown

90

ups.load

255

ups.mfr

Tripp Lite

ups.model

Tripp Lite UPS

ups.power

0.0

ups.power.nominal

900

ups.productid

2012

ups.status

OL

ups.timer.reboot

65535

ups.timer.shutdown

65535

ups.vendorid

09ae

ups.watchdog.status

0

Known supported commands

This device is known to support the following NUT’s instant commands:

  • beeper.disable

  • beeper.enable

  • beeper.mute

  • beeper.off

  • beeper.on

  • load.off

  • load.off.delay

  • reset.watchdog

  • shutdown.reboot

  • shutdown.stop

  • test.battery.start.deep

  • test.battery.start.quick

  • test.battery.stop