Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Zigor.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.6.1

Report #1

This device is known to work with driver blazer_usb. It may also work with driver nutdrv_qx.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.voltage

13.90

battery.voltage.nominal

12.0

beeper.status

disabled

device.mfr

ZIGOR

device.model

EBRO 650

device.type

ups

driver.name

blazer_usb

driver.parameter.pollinterval

2

driver.parameter.port

auto

driver.parameter.productid

0000

driver.parameter.vendorid

0001

driver.version

2.6.1

driver.version.internal

0.03

input.current.nominal

2.8

input.frequency

50.0

input.frequency.nominal

50

input.voltage

227.0

input.voltage.fault

165.0

input.voltage.nominal

230

output.voltage

227.0

ups.delay.shutdown

30

ups.delay.start

180

ups.firmware

VER 1.74

ups.load

10

ups.mfr

ZIGOR

ups.model

EBRO 650

ups.productid

0000

ups.status

OL

ups.temperature

0.0

ups.type

offline / line interactive

ups.vendorid

0001