Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Tripp Lite.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.6.3

Report #1 with driver usbhid-ups (detailed comments available)

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100

battery.charge.low

10

This variable can be set through upsrw to a string value.

battery.charge.warning

30

battery.runtime

10800

battery.type

PbAC

battery.voltage

0.0

battery.voltage.nominal

24.0

device.mfr

Tripp Lite

device.model

TRIPP LITE UPS

device.serial

CCSYWWZZZZ

device.type

ups

driver.name

usbhid-ups

driver.parameter.pollfreq

30

driver.parameter.pollinterval

2

driver.parameter.port

auto

driver.parameter.productid

3016

driver.version

2.6.3

driver.version.data

TrippLite HID 0.6

driver.version.internal

0.35

input.frequency

5990.0

input.transfer.high

150.0

This variable can be set through upsrw to a string value.

input.transfer.low

92.0

This variable can be set through upsrw to a string value.

input.voltage

0.0

input.voltage.nominal

120

output.current

0.00

output.frequency

5990.0

output.frequency.nominal

60

output.voltage

0.0

output.voltage.nominal

120

ups.beeper.status

disabled

ups.delay.shutdown

20

This variable can be set through upsrw to a string value.

ups.delay.start

30

This variable can be set through upsrw to a string value.

ups.load

0

ups.mfr

Tripp Lite

ups.model

TRIPP LITE UPS

ups.power

0.0

ups.power.nominal

1500

ups.productid

3016

ups.serial

CCSYWWZZZZ

ups.status

OL

ups.timer.reboot

65535

ups.timer.shutdown

65535

ups.timer.start

65535

ups.vendorid

09ae

ups.watchdog.status

0

Known supported commands

This device is known to support the following NUT’s instant commands:

  • beeper.disable

  • beeper.enable

  • beeper.mute

  • beeper.off

  • beeper.on

  • load.off

  • load.off.delay

  • load.on

  • load.on.delay

  • reset.watchdog

  • shutdown.reboot

  • shutdown.return

  • shutdown.stayoff

  • shutdown.stop