Name | Description |
---|---|
load.off | Turn off the load immediately |
load.on | Turn on the load immediately |
load.off.delay | Turn off the load possibly after a delay |
load.on.delay | Turn on the load possibly after a delay |
shutdown.return | Turn off the load possibly after a delay and return when power is back |
shutdown.stayoff | Turn off the load possibly after a delay and remain off even if power returns |
shutdown.stop | Stop a shutdown in progress |
shutdown.reboot | Shut down the load briefly while rebooting the UPS |
shutdown.reboot.graceful | After a delay, shut down the load briefly while rebooting the UPS |
test.panel.start | Start testing the UPS panel |
test.panel.stop | Stop a UPS panel test |
test.failure.start | Start a simulated power failure |
test.failure.stop | Stop simulating a power failure |
test.battery.start | Start a battery test |
test.battery.start.quick | Start a "quick" battery test |
test.battery.start.deep | Start a "deep" battery test |
test.battery.stop | Stop the battery test |
test.system.start | Start a system test |
calibrate.start | Start runtime calibration |
calibrate.stop | Stop runtime calibration |
bypass.start | Put the UPS in bypass mode |
bypass.stop | Take the UPS out of bypass mode |
ecomode.enable | Put UPS in High Efficiency (aka ECO) mode |
ecomode.disable | Take the UPS out of High Efficiency (aka ECO) mode |
essmode.enable | Put UPS in Energy Saver System (aka ESS) mode |
essmode.disable | Take the UPS out of Energy Saver System (aka ESS) mode |
reset.input.minmax | Reset minimum and maximum input voltage status |
reset.watchdog | Reset watchdog timer (forced reboot of load) |
beeper.enable | Enable UPS beeper/buzzer |
beeper.disable | Disable UPS beeper/buzzer |
beeper.mute | Temporarily mute UPS beeper/buzzer |
beeper.toggle | Toggle UPS beeper/buzzer |
outlet.n.shutdown.return | Turn off the outlet possibly after a delay and return when power is back |
outlet.n.load.off | Turn off the outlet immediately |
outlet.n.load.on | Turn on the outlet immediately |
outlet.n.load.cycle | Power cycle the outlet immediately |
outlet.n.shutdown.return | Turn off the outlet and return when power is back |