NAME

belkin - Driver for Belkin serial UPS equipment

NOTE ABOUT HISTORIC NUT RELEASE

Note
Two NUT websites

This version of the page reflects NUT release v2.8.1 with codebase commited 4ba352d8f at 2023-10-31T21:46:20+01:00

Options, features and capabilities in current development (and future releases) are detailed on the main site and may differ from ones described here.

NOTE

This man page only documents the hardware-specific features of the belkin driver. For information about the core driver, see nutupsdrv(8).

SUPPORTED HARDWARE

The belkin driver is known to support the Regulator Pro 525 (F6C525-SER). Other similar models such as the 425 and 625 should also work.

The Trust UPS and older Belkin units are not supported.

This driver only supports serial connections. If your UPS has a USB port, please consult the Hardware Compatibility List (HCL) to see which of the USB drivers you should use.

EXTRA ARGUMENTS

This driver does not support any extra settings in the ups.conf(5).

BUGS

There are dragons lurking within the protocol to this UPS. I have one that essentially behaves like a glorified power strip due to some invasive probing on my part. Don’t mess with it directly.

Note
the driver doesn’t go anywhere near these character sequences, so it won’t zap your UPS. I only mention this here as yet another reminder of the perils of closed hardware.

SEE ALSO

The core driver:

Internet resources:

The NUT (Network UPS Tools) home page: https://www.networkupstools.org/