Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from APC.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.0.0

Report #1 with driver apcsmart (detailed comments available)

This device is known to work with driver apcsmart.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.alarm.threshold

L

battery.charge

100.0

battery.date

11/6/03

battery.packs

001

battery.packs.bad

000

battery.runtime

1620

battery.runtime.low

120

driver.name

apcsmart

driver.parameter.port

/dev/ttyj7

driver.version

2.0.0

driver.version.internal

1.99.6

input.frequency

51.20

input.quality

FF

input.transfer.reason

T

input.voltage

229.0

input.voltage.maximum

229.0

input.voltage.minimum

229.0

output.current

17.10

output.voltage

230.0

output.voltage.target.battery

230

ups.delay.shutdown

180

ups.delay.start

060

ups.firmware

381.5.I

ups.id

UPS_IDEN

ups.mfr

APC

ups.mfr.date

11/06/01

ups.model

Smart-UPS DP 8000 XL

ups.serial

GS0144110071

ups.status

OL

ups.temperature

025.0

ups.test.interval

1209600

ups.test.result

NO