Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Ablerex.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.7.2

Report #1 with driver blazer_ser (detailed comments available)

This device is known to work with driver blazer_ser. It may also work with driver nutdrv_qx.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100

battery.voltage

108.48

battery.voltage.high

104.00

battery.voltage.low

83.20

battery.voltage.nominal

96.0

device.mfr

Ablerex

device.model

MS3000RT

device.type

ups

driver.name

blazer_ser

driver.parameter.pollinterval

2

driver.parameter.port

/dev/ttyUSB0

driver.version

2.7.2

driver.version.internal

1.56

input.current.nominal

14.0

input.frequency

50.0

input.frequency.nominal

50

input.voltage

230.6

input.voltage.fault

190.0

input.voltage.nominal

220

output.voltage

220.0

ups.beeper.status

disabled

ups.delay.shutdown

30

ups.delay.start

180

ups.firmware

MS02035C

ups.load

60

ups.mfr

Ablerex

ups.model

MS3000RT

ups.status

OL

ups.temperature

38.2

ups.type

online