Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Eaton.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.7.2

Report #1 with driver bcmxcp_usb (detailed comments available)

This device is known to work with driver bcmxcp_usb.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

ambient.temperature

43

ambient.temperature.high

75

battery.charge

100

battery.runtime

24171

battery.voltage

40.96

device.mfr

Eaton

device.model

PW5115 RM 1500i

device.part

XXXXXXXXX-XXXX

device.serial

XXXXXXXXXX

device.type

ups

driver.name

bcmxcp_usb

driver.parameter.pollinterval

2

driver.parameter.port

auto

driver.version

2.7.2

driver.version.internal

0.28

input.frequency

50.00

input.frequency.high

55

input.frequency.low

45

input.frequency.nominal

50

input.transfer.boost.high

207

input.transfer.high

266

input.transfer.low

194

input.transfer.trim.low

243

input.voltage

239

input.voltage.nominal

230

outlet.1.delay.shutdown

-1

outlet.1.delay.start

3

outlet.1.id

1

outlet.1.status

On

outlet.2.delay.shutdown

-1

outlet.2.delay.start

13

outlet.2.id

2

outlet.2.status

On

output.current

0.0

output.current.nominal

6.4

output.frequency

50.00

output.frequency.nominal

50

output.phases

1

output.voltage

239

output.voltage.nominal

230

ups.beeper.status

enabled

ups.description

Line-Interactive UPS, Single Phase

ups.firmware

Cont:01.20 Inve:01.02

ups.load

0.2

ups.mfr

Eaton

ups.model

PW5115 RM 1500i

ups.power

3

ups.power.nominal

1500

ups.realpower

0

ups.serial

XXXXXXXXXX

ups.status

OL

ups.test.result

Done and passed

About this device

Just wanted to provide an upsc dump for an Eaton/Powerware 5115 rack mount unit. This was on a CentOS 7.3 machine with following packages installed:

  • nut-client-2.7.2-3.el7.x86_64

  • nut-2.7.2-3.el7.x86_64

  • nut-cgi-2.7.2-3.el7.x86_64 

:; upscmd -u root eaton5115 test.battery.start
Password:
OK

Reported at: