Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from IBM.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.6.1

Report #1 with driver snmp-ups (detailed comments available)

This device is known to work with driver snmp-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

92.00

battery.current

0.00

battery.runtime

21420.00

battery.runtime.low

180.00

battery.temperature

0.00

battery.voltage

41.00

beeper.status

enabled

device.mfr

IBM

device.model

IBM 1440VA/1000W Rack HV UPS

device.type

ups

driver.name

snmp-ups

driver.parameter.mibs

ietf

driver.parameter.pollinterval

2

driver.parameter.port

166.99.224.166

driver.version

2.6.1

driver.version.internal

0.50 (mib: ietf 1.3)

input.bypass.phases

0.00

input.current

0.00

input.frequency

49.90

input.frequency.nominal

50.00

input.phases

1.00

input.realpower

0.00

input.transfer.high

286.00

input.transfer.low

160.00

input.voltage

239.00

input.voltage.nominal

230.00

output.current

0.00

output.frequency

0.00

output.frequency.nominal

50.00

output.phases

1.00

output.power.nominal

1440.00

output.realpower

0.00

output.realpower.nominal

1000.00

output.voltage

0.00

output.voltage.nominal

230.00

ups.firmware

INV: 01.02.0012

ups.firmware.aux

Network Management Card V6.00 01.05.0001

ups.load

0.00

ups.mfr

IBM

ups.model

IBM 1440VA/1000W Rack HV UPS

ups.start.auto

yes

ups.status

OFF

ups.test.result

done and passed

ups.timer.reboot

-1

ups.timer.shutdown

-1

ups.timer.start

-1