Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from MGE UPS SYSTEMS.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.0.3

Report #1 with driver mge-shut (detailed comments available)

This device is known to work with driver mge-shut.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

36

battery.charge.low

30

battery.runtime

00617

driver.name

mge-shut

driver.parameter.lowbatt

90

driver.parameter.notification

3

driver.parameter.offdelay

20

driver.parameter.ondelay

3

driver.parameter.port

/dev/cuaa0

driver.version

2.0.3-pre1

driver.version.internal

0.65

outlet.0.desc

Main Outlet

outlet.0.id

1

outlet.0.switchable

0

outlet.1.autoswitch.charge.low

0

outlet.1.desc

PowerShare Outlet 1

outlet.1.id

2

outlet.1.switch

1

outlet.1.switchable

0

output.voltage

230

ups.delay.shutdown

-1

ups.delay.start

-1

ups.load

8

ups.mfr

MGE UPS SYSTEMS

ups.power.nominal

800

ups.serial

unknown

ups.status

OL CHRG

About this device

The UPS doesn’t shutdown

Reported at:

2.0.2

Report #1 with driver mge-shut (detailed comments available)

This device is known to work with driver mge-shut.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

82

battery.charge.low

30

battery.runtime

01406

driver.flag.nolock

enabled

driver.name

mge-shut

driver.parameter.lowbatt

90

driver.parameter.notification

3

driver.parameter.offdelay

60

driver.parameter.ondelay

9

driver.parameter.pollinterval

15

driver.parameter.port

/dev/cuaa0

driver.version

2.0.2

driver.version.internal

0.64

outlet.0.desc

Main Outlet

outlet.0.id

1

outlet.0.switchable

0

outlet.1.autoswitch.charge.low

0

outlet.1.desc

PowerShare Outlet 1

outlet.1.id

2

outlet.1.switch

1

outlet.1.switchable

0

output.voltage

230

ups.delay.shutdown

-1

ups.delay.start

-1

ups.load

26

ups.mfr

MGE UPS SYSTEMS

ups.model

ellipse 800

ups.power.nominal

800

ups.serial

unknown

ups.status

OB DISCHRG